Hydraulic brake booster » Specifications
How to install the 3/8" barbed return hose T-fitting:
Residual pressure valve:
Jeep Reservoir Removal:
Converted MC using 1980+ Jeep Reservoir:
Dimensions of a Hydraulic brake booster unit for a remote reservoir:
How to bend the GM hoses to fit your pump and steering box:
Bending custom hoses:
If you are building custom rubber hoses using 37* flare JIC 90* swivel fittings and need to know the part numbers for the respective AN-6 port adapters here they are as follows below: (note you can buy the field serviceable 90* swivel hose ends and build your own pretty easy, PSC sells those, the fittings and the hose http://www.pscmotorsports.com/ ).
(PSC Motor Sports SKU #: PSC-SF03)
-or-
Steering box pressure out (most 1980 up), 18x1.5mm: Aeroquip # FBM2609
(PSC Motor Sports SKU #: PSC-SF01)
Pump pressure out (most 1979 down), 5/8x18 flare: Aeroquip # FBM2964
(PSC Motor Sports SKU #: PSC-SF04)
-or-
Pump pressure out (most 1980 up), 16x1.5mm: Aeroquip # FBM2608
(PSC Motor Sports SKU #: PSC-SF02)
1992 HB pressure in, 18x1.5mm: Aeroquip # FBM2609
(PSC Motor Sports SKU #: PSC-SF01)
1992 HB pressure out, 16x1.5mm: Aeroquip # FBM2608
(PSC Motor Sports SKU #: PSC-SF01)
HB return out (if not using the hose barb and you want to plumb for JIC fittings)
5/16x24 o-ring Boss
Top